Section 4: Optional Equipment
4-12 Section 4: Optional Equipment Aspila EX Hardware
Installing a 24-Button DLS Console
1. The console should be installed on the right-hand side of the phone in order to use the fixing
plate supplied with the console.
2. Turn the system phone over which will have the 24-Button DLS Console installed.
3. If more than one adapter is to be installed on the phone, the console should be installed on the
connector nearest the right-hand side. Using a flat-head screwdriver, remove the plastic
punch-out piece covering the connector.
4. Plug the 24-Button DLS Console into the connector on the bottom of the system phone.
5. Push the cable from the console into the cable channel to allow the phone to rest flat.
6. Install the fixing plate provided with the 24-Button DLS Console to the bottom of the console
and phone to join the two sets together.
Figure 4-12: INSTALLING THE CONNECTOR PLATE
Figure 4-13: INSTALLED 24-BUTTON DSS CONSOLE
To Next Page
Loading...
