Note: When selecting Automatic or not performing this ringer
tone setting, Tone Type 1 is automatically applied.
Note: When selecting Automatic, the preview function will not
operate. Also, when selecting Download 1/2/3, the ringer
tone file must be downloaded in advance. If there is no
downloaded file, you hear no tone.
Note: Tone Type 1 to Tone Type 8:
In the preview function, each ringer tone sounds
continuously. Actual ringer pattern of each tone is
determined by the initial system settings.
Note: Terminal settings may not become effective, according to
the system settings. For details, contact the System
Administrator.
No. Menu Item
Frequency (Hz)
Remarks
1st 2nd
0 Automatic 520 660 16Hz modulation
1 Tone Type 1 520 660 16Hz modulation
2 Tone Type 2 520 660 8Hz modulation
3 Tone Type 3 1400 1100 Door Phone
4 Tone Type 4 1100 No modulation
5 Tone Type 5 540 No modulation
6 Tone Type 6 1100 1400 16Hz modulation
7 Tone Type 7 660 760 16Hz modulation
8 Tone Type 8 1100 Envelope
9 Tone Type 9 – Door Phone Melody
10 Tone Type 10 – Melody 1
11 Tone Type 11 – Melody 2
12 Tone Type 12 – Melody 3
13 Tone Type 13 – Melody 4
14 Tone Type 14 – Melody 5
15 Music Ring 1 –
16 Music Ring 2 –
17 Music Ring 3 –
TIP
The enabled item is highlighted.
TIP
You can set the ringer tone for the telephone here.
Ringer Tone type can be set for Name, Group and
Telephone set. The ringer Tone type set for Name has
higher priority than the types set for Group and
Terminal set.
No. Menu Item
Frequency (Hz)
Remarks
1st 2nd
To Next Page
Loading...
