NEC DT820 - Page 44

38
1.
STEP 5: Select External Call when setting the
illumination pattern for external calls.
Select Internal Call when setting the
illumination pattern for internal call.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
• Press or .
STEP 6: Select a desired illumination pattern. You
can preview the designated illumination
pattern.
Select an item by one of the following operations.
• Highlight an item by using , and press
or OK.
• Press - , and press or OK.
Note: When selecting Automatic, the preview function will not
operate.
Note: When selecting Automatic or not performing this
illumination setting, Red is automatically applied.
1
2
1
2

Back
OK
1
2
[Illumination]
External Call
1/1
Internal Call
0
9
TIP
You can set the illumination pattern for the telephone
here. Illumination pattern can be set for Name, Group
and Telephone set. The illumination pattern set for
Name has higher priority than the patterns set for
Group and Terminal set.
0
1
2
3
OK
Back

4
5
6
1/2
Automatic
[External Call]
Disable
Red
Green
Yellow
Purple
Rotation