NEC DT820 - Page 47

41
1.
STEP 4: Select DTMF Tone.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
• Press .
STEP 5: Select Automatic, Disable or
Enable (see the following table).
Select an item by one of the following operations.
• Highlight an item by using , and press
or OK.
• Press - , and press or OK.
OK
Back
1/1
[User Setting]
1
2
3
4
5
6

Display
Change Password
Security
Incoming Call
Talk

0
Setting Reset
Usability
2
2

Back
OK
1/1
[Talk]
1
2
3
4
5
Key Touch Tone
Hold Music
Prefix
RTP Alarm

DTMF Tone
Menu Items Description
0 Automatic
Follow the system settings. If no setting is
made in the system, the default setting
(DTMF=ON) is applied.
1 Disable Follow the terminal settings (OFF).
2 Enable Follow the terminal settings (ON).
TIP
For the setting on the system, contact the System
Administrator.
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
0
1
2
0
2
0
1

1/1
Automatic
OK
Back
Disable
2
Enable
[DTMF Tone]