NEC DT820 - Page 84

78
1.
STEP 15: Select Server Address.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 16: Enter an IP Address of the destination
FTP/TFTP/HTTPS server.
For example, to set the IP address of 10.41.208.205,
enter 10*41*208*205 [separate with an asterisk (*)].
After entering an IP Address, press (Enter)
or OK.
STEP 17: The display returns to the Backup/
Restore screen. Select Data Backup.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 18: The default file name is displayed as
follows:
Note:
Do not change the extension of the backup file. The setting
data of the telephone can only be backed up as a.tgz file.
3
3
OK
Back
1/1


[Backup/Restore]
1
2
3
4
Data Backup
Data Restore
5
Account Settings
Protocol
Server Address
OKBack
BK
1
‘*‘For‘.‘
.
.
.
000
0
[Server Address]
1
1
OK
Back
1/1


[Backup/Restore]
1
2
3
4
Data Backup
Data Restore
5
Account Settings
Protocol
Server Address
BK
A
Cancel
Exec
[Data Backup]
Input a folder name.
PersonalData.tgz