2. Setting up
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
17
Chapter 1 Installing Operating System
2.2.3
Checking Boot Mode Settings
Check Boot Mode settings before setup.
1. When you move the cursor onto Boot, the Boot menu appears.
Check the settings of Boot Mode. If the mode is not [UEFI], change it to [UEFI].
2. Move the cursor onto Save & Exit, and the Save & Exit menu appears.
3. Select Save changes and Exit and press Enter.
The following confirmation window appears.
4. On the confirmation window, select Yes and press Enter.
Parameters are saved and SETUP is closed.
Now setting before setup is completed.
System reboots when SETUP completes.
To Next Page
Loading...
