Glossary
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
64
Glossary
Terms Description
BIOS Setup Utility (SETUP) Software for setting BIOS. You can run this software by pressing <F2> key during POST.
BMC Baseboard Management Controller (BMC) is a built-in controller that supports the IPMI
version 2.0 protocol. BMC can manage the server hardware.
BMC Configuration Utility Software for setting BIOS or BMC. You can use as Windows application or run this
software when pressing <F4> key during POST.
CPU module A CPU subsystem logically configured in a CPU/IO module. It includes CPUs and
memory.
CPU/IO module A module that includes CPUs (processors), memory, PCI boards, a cooling fan, hard disk
drives and power supply units.
DUMP Switch A switch that is used for collecting the memory dump if an error occurs. You can specify
the destination of the dump by using the OS function.
EXPRESSBUILDER Standard software with a feature that makes it easier to install Windows OS in Windows
model. This also includes several useful applications and instruction manuals. (When
installing OS other than Windows in ft server, the feature that helps easy OS installation is
not available.)
EXPRESSSCOPE ENGINE 3 A name of BMC for NEC Express5800 series.
Express Report Service Software that can report the server failure to the contact center by E-mail or modem. This
software is installed with NEC ESMPRO Agent to the server.
Express Report Service (HTTPS) Software that can report the server failure to the contact center by HTTPS.
ExpressUpdate A feature for updating BIOS, firmware, driver, or software of the server. This feature is
available when NEC ESMPRO Manager cooperates with EXPRESSSCOPE ENGINE 3
and ExpressUpdate Agent.
ExpressUpdate Agent Software for performing ExpressUpdate. This is installed to the server.
Flash FDD An optional USB device that can use as a floppy disk drive.
NEC ESMPRO Standard software for the server management. This consists of several applications for
managing or monitoring.
NEC ESMPRO Agent Software for monitoring the server. This works with NEC ESMPRO Manager and resides
as the OS service.
NEC ESMPRO Agent Extension Software for performing the scheduled operations. This works with NEC ESMPRO
Manager.
NEC ESMPRO Manager Software for managing plural servers on network.
OS standard installer An installer that stored in Windows installation disc. Use this installer if you want to install
the OS manually.
Offline tools Software that can confirm or change IPMI data such as SEL, SDR, or FRU. You can start
Offline tools when pressing <F4> key during POST.
PC for Management A computer for managing the server on network. A general Windows/Linux computer can
be used as "PC for Management".
PCI module An I/O subsystem logically configured in a CPU/IO module. It includes hard disk drives,
PCI cards, BMC and 1G/10G LAN.
Product Info Collection Utility Software for collecting several hardware/software statuses or event logs. You can easily
collect the data for the server maintenance by using this software.
Windows OS parameter file A file that saved settings for installing Windows. You can install with the saved settings in
this file when setting Windows with EXPRESSBUILDER.
To Next Page
Loading...
