NEC Express Server Express5800 Series - Backing up System Information; Bios Setup

2. Setting up
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
43
Chapter 1 Installing Operating System
2.8 Backing Up System Information
It is recommended to write down your system information when you finish system setup.
With backup copy of system information, the information and settings that are specific to your server can be
restored after the server is repaired. Take the steps below to make a backup copy of your system information:
2.8.1
BIOS SETUP
Power on the server.
While the following message is displayed on POST, press the <F2> key.
Press <F2> SETUP, <F4> ROM Utility, <F12> Network
Write down the new parameter values upon completion of POST.
Example)
[Advanced]-[PCI Configuration]-[SAS Option ROM Scan]
[Advanced]-[PCI Configuration]-[PCIx Slot Option ROM]
[Security]
[Server]-[OS Boot Monitoring]
[Server]-[AC-LINK]
[Server]-[Power On Delay Time]
[Boot]-[Boot Option Priorities]
When you select [Save & Exit]-[Save Changes and Exit], the following message appears.
Save configuration and exit?
Click [Yes] to restart the server.