2. Setting up
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
20
Chapter 1 Installing Operating System
2.3
OS Setup
This section describes how to set up an OS.
Important
This document describes the procedure for establishing the environment
recommended by NEC. If customers customize the system, fully study the
system configuration in advance, and replace the description as required to set
up the system.
It is recommended to make a backup copy of user data as needed.
2.3.1
Installing Red Hat Enterprise Linux 7.2
Install Red Hat Enterprise Linux 7.2 according to the following procedure.
1. Turn the power of this system ON, and then set the RHEL7.2 installation media to the optical disk drive.
2. The boot screen appears. Select [Test this media & install Red Hat Enterprise Linux 7.2] if you check the
installation media. If you do not check the installation media, select [Install Red Hat Enterprise Linux 7.2].
Then, press the <Enter> key.
Tips If nothing is input for a certain amount of time, [Test this media & install Red Hat
Enterprise Linux 7.2] is selected automatically, and the next screen appears after
executing the installation media check.
It is recommended to check the installation media for a problem. Checking the media
takes several or several tens of minutes.
3. The screen to select language and keyboard appears. Select [English], and click [Continue].
To Next Page
Loading...
