2. Setting up
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
33
Chapter 1 Installing Operating System
2.3.5
Updating packages
Follow the steps below to update packages.
1. Store the package you have downloaded from Red Hat Network in the desired directory, and go to
that directory.
2. Run the following command to update packages.
# rpm -Uvh --oldpackage nfs-utils-1.3.0-0.8.el7.x86_64.rpm
Tips
If nfs-utils included in the RHEL7.2 installation media is not installed due to customization
by a customer, it is not required to apply this file.
3. Run the following command to update packages.
# rpm -Uvh samba-* lib* pytalloc-2.1.5-1.el7_2.x86_64.rpm
Tips
If Samba included in the RHEL7.2 installation media is not installed due to customization
by a customer, it is not required to apply this file.
4. Run the following command to update packages.
# rpm -Uvh glibc-*
# rpm -Uvh dracut-*
# rpm -Uvh openssl-*
# rpm -Uvh kernel-doc-3.10.0-327.18.2.el7.noarch.rpm
# rpm -Uvh kernel-devel-3.10.0-327.18.2.el7.x86_64.rpm
# rpm -Uvh kernel-3.10.0-327.18.2.el7.x86_64.rpm
5. Run the following command to reboot the system.
# systemctl reboot
To Next Page
Loading...
