2. Setting up
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
21
Chapter 1 Installing Operating System
4. The "INSTALLATION SUMMARY" screen appears. Click [DATE & TIME].
5. The "DATE & TIME" screen appears. Change the date and time displayed at the bottom of the screen as
required, and click [Done].
Note The date and time specified here is converted to Universal Time Coordinated (UTC), and
reflected to the hardware clock when the installer exits. Do not change the UTC setting also
after installation.
Tips
The time displayed here may be about seven minutes fast or slow by default even though it
is set in BIOS setting. Set the correct time again.
6. Click [SOFTWARE SERECTION].
To Next Page
Loading...
