2. Setting up
Express5800/R320e-E4, R320e-M4 Installation Guide (Linux)
26
Chapter 1 Installing Operating System
The "ADD A NEW MOUNT POINT" screen appears. Set [Mount Point] and [Desired Capacity], and click [Add
mount point].
Important
Do not allocate the /usr partition to the partitions other than the / (root) partition
since the boot process becomes complex.
Note
As the mount point of EFI System Partition , be sure to set /boot/efi.
Tips
If [Desired Capacity] is blank, all the remaining spaces are used.
For [Device Type], make sure to select “RAID1 (Redundancy)” for [RAID Level], and set [File System]. Create
all partitions according to the same procedure.
To Next Page
Loading...
