2-10 Configuring Linux
Disk Administrator Tool (ftdiskadm)
The disk administrator tool (ftdiskadm) confirms internal SCSI disk status or set
RAID configurations.
Use ftdiskadm to perform the following functions:
! Confirm the status of all the internal SCSI disks
! Confirm RAID status of internal SCSI disks
! Recover RAID of internal SCSI disks
! Add internal SCSI disks
! Remove internal SCSI disks.
A ftdiskadm display sample is shown below.
# ftdiskadm
Command action
1 => SCSI
2 => RAID
3 => Environment
9 Quit
Command: 2
Command action
1 Status(Raid)
2 Status(All Disks)
3 Repair Disk
4 New Disks
5 Remove Half Disk
6 Remove Full Disks
9 <= RETURN
Command:
...
To Next Page
Loading...
