ESMPRO Agent for Linux 3-15
General Properties
Enable the ESMPRO Manager to modify SNMP Setting - Indicates whether
the Manager can modify server parameters via SNMP. A check enables
Manager modifications; no check disallows Manager changes.
Enable Remote Shutdown/Reboot - Specifies whether the Manager can
perform a remote shutdown or reboot. A check gives the Manager permission.
No check denies the Manager permission.
Note: Also, enable “Shutdown Delay” in the “Base
Setting” window of the “Alert Manager Report Setting Utility
(./ESMamsadm).” Refer to “Report Setting” section found
earlier in this chapter.
SNMP Community - The name of the SNMP community to which this Agent
belongs.
Rackmount Name – If this server is assigned to a rack, indicate the Rackmount
name. Servers in the same rack are then displayed together under a Rackmount
icon in the Operations Window.
To Next Page
Loading...
