3-10 ESMPRO Agent for Linux
Scheduling Responses
You can schedule which hours of the day a particular destination ID is active.
For example, you can set the agent to respond to the same alert type by
displaying a message during regular working hours. Selecting Schedule from the
ID Setting menu above displays the Schedule menu. A schedule can be set for
each destination ID. In the schedule set a report retry interval which is usually
set in the range of 1 to 30 minutes. Set the retry expiration time in the range of 0
to 240 hours and set the report time table periods.
Manager (TCP_IP In-Band)
When you define a destination ID based on this method, you specify the
destination IP address or host name and destination port number, and can also
specify a reporting schedule.
To Next Page
Loading...
