ESMPRO Agent for Linux 3-11
IP Address – The address or name of the remote manager. Make sure the
remote manager is not also specified as the trap destination on the SNMP
service. If a duplicate is made, more than one alert will be reported.
Port Number – The port number used for communication between sockets. The
same port number must be set for both the agent and the remote manager. The
default value is 31134.
Manager (TCP_IP Out-of-Band)
When you define a destination ID based on this method, you provide RAS
address information and can also specify a reporting schedule.
IP Address – The IP address of the remote manager.
Phone Number – The telephone number of the remote manager’s modem line.
User – A user name for the remote manager.
Password – The user’s password.
Port Number – The port number used for communication between sockets. The
same port number must be set for both the agent and the remote manager. The
default value is 31134.
To Next Page
Loading...
