3-2 ESMPRO Agent for Linux
NEC ESMPRO Agent
NEC ESMPRO Agent is a utility that serves as an agent between the server and
NEC ESMPRO Manager (management PC). Using the agent, you can set and
reset values for a number of parameters and also establish threshold limits for
your server.
Required Software Modules
Agent for Linux requires installation of the following software modules.
! ucd-snmp (Linux module)
! newt (Linux module)
! slang (Linux module)
! portmap (Linux module)
Installing the Agent
Starting portmap
Before you install Agent for Linux, ensure Linux module portmap is running.
At the command prompt execute the following commands.
/sbin/chkconfig portmap on
/etc/rc.d/init.d/portmap start
To Next Page
Loading...
