3-4 ESMPRO Agent for Linux
Selecting "3" terminates operation without installing NEC ESMPRO Agent.
A message is displayed prompting you to enter the directory where NEC
ESMPRO Agent is to be installed.
ESMPRO_SA_DIR==>
7. Specify an arbitrary directory.
If you do not specify any directory and press <Enter>, NEC ESMPRO
Agent is installed in the following directory:
/opt/nec/esmpro_sa
IMPORTANT: When installing NEC ESMPRO Agent in a desired directory,
specify the directory with a full path name starting with /. Do not specify only /.
A message is displayed indicating the end of installation.
8. Restart the system.
The functions of the installed NEC ESMPRO Agent are enabled when the
system has restarted.
IMPORTANT: To get NEC ESMPRO Agent to report data to NEC ESMPRO
Manager, set a reporting method by the "report setting function" after restarting
the system. For the setting of a reporting method, read the explanation later.
This completes the installation.
Updating the Agent
1. Log in the system as a root-authorized user.
2. Insert the provided CD-ROM #2 into the CD-ROM drive.
3. Enter the following command to mount the CD-ROM:
The procedure here is explained with the mount point as "/mnt/cdrom."
mount /mnt/cdrom
4. Move to the directory containing the setup program.
cd /mnt/cdrom/nec/Linux/esmpro_sa
5. Execute the setup program.
./ESMinstall
The setup program starts and displays the following menu:
1) Install
2) UnInstall
3) Exit
To Next Page
Loading...
