NEC Express5800 320La - Page 26

2-18 Configuring Linux
Confirm the disk status (check if the disk(s) has been added normally).
Command action
1 Status(Raid)
2 Status(All Disks)
3 Repair Disk
4 New Disks
5 Remove Half Disk
6 Remove Full Disks
9 <= RETURN
Command: 1
[Status(Raid)]
-------------------------------------------------------------------------------
name partition label status member
md0 /boot /boot DUPLEX (1)sda1 (4)sdd1
md1 /usr /usr DUPLEX (1)sda5 (4)sdd5
md2 /home /home DUPLEX (1)sda10 (4)sdd10
md3 /var /var DUPLEX (1)sda6 (4)sdd6
md4 / / DUPLEX (1)sda8 (4)sdd8
md5 /tmp /tmp DUPLEX (1)sda9 (4)sdd9
md6 /swap DUPLEX (1)sda7 (4)sdd7
md7 extra_s1 RESYNC(9
.3%)
(3)sdc1 (6)sdf1
md8 extra_s5 RESYNC (3)sdc5 (6)sdf5
md9 extra_s6 RESYNC (3)sdc6 (6)sdf6
-------------------------------------------------------------------------------
Command action
1 Status(Raid)
2 Status(All Disks)
3 Repair Disk
4 New Disks
5 Remove Half Disk
6 Remove Full Disks
9 <= RETURN
Command: