1. List of Windows Event Logs
Installation Guide (Windows Server 2022)
68
Chapter 3 Appendix
ID
Source Level Message (Description)
Timing when an event is logged Action
All Windows OS ”System Log”
56
Application Popup Error
The description for Event ID 56 from source Application
Popup cannot be found. Either the component that raises
this event is not installed on your local computer or the
installation is corrupted. You can install or repair the
component on the local computer.
If the event originated on another computer, the display
information had to be saved with the event.
The following information was included with the event:
SCSI
XXXXXXXXXXXXXXXXX
The message resource is present but the message was not
found in the message table.
* A different number replaces X depending on the
connection status of RAID controller and SAS controller.
When installing an OS, starting system, or
applying Starter Pack
When multiple RAID controller or SAS controller are loaded it is
registered, but does not affect system operation.
129
SmartPqi Warning
Reset was issued to the device \Device\RaidPort(x).
(x is any number)
While the system is running
Even if the message is registered in the log, there is no problem
because the OS has successfully completed the retry. You don't
need any changes.
157
Disk Warning Disk x is suddenly removed.
When creating a RAID
If you create new RAID on Windows, this event can be registered,
but this does not affect the system operation.
1407
ESMCommonService Error
This is the event which occurred between this system start-up and
the last system stop or system shutdown.
Date : YYYY-MM-DD hh:mm:ss
Event Class : 0x11
Event Code : 0x0A
Status : Critical
Description : xxxxx Connectivity status changed to xxxxx
for adapter in slot x, port x
When starting system,
or applying Standard Program Package
This event does not affect system operation.
1407
ESMCommonService Error
This is the event which occurred between this system start-up and
the last system stop or system shutdown.
Date : YYYY-MM-DD hh:mm:ss
Event Class : 0x11
Event Code : 0x0C
Status : Critical
Description : Redundancy status changed to xxxxx by adapter in
slot x, port x
When starting system,
or applying Standard Program Package
This event does not affect system operation.
To Next Page
Loading...
Need help?
General
