1. List of Windows Event Logs
Installation Guide (Windows Server 2022)
71
Chapter 3 Appendix
ID
Source Level Message (Description)
Timing when an event is logged Action
Windows Server 2022 ”System Log”
4
l2nd2 Warning
Marvell FastLinQ Ethernet 10Gb 2-port BaseT QL41132HQRJ OCP3
Adapter #xx: The network link is down. Check to make sure the
network cable is properly connected.
When installing an OS, starting system, or
applying Standard Program Package
This event does not affect system operation.
4
l2nd2 Warning
Marvell FastLinQ Ethernet 10Gb 2-port BaseT QL41132HLRJ
Adapter #xx: The network link is down. Check to make sure the
network cable is properly connected.
When installing an OS, starting system, or
applying Standard Program Package
This event does not affect system operation.
4
l2nd2 Warning
Marvell FastLinQ Ethernet 10/25Gb 2-port SFP28 QL41232HLCU
Adapter #xx: The network link is down. Check to make sure the
network cable is properly connected.
When installing an OS, starting system, or
applying Standard Program Package
This event does not affect system operation.
129
SmartPqi Warning
Reset was issued to the device \Device\RaidPort(x).
(x is any number)
While the system is running
Even if the message is registered in the log, there is no problem
because the OS has successfully completed the retry. You don't
need any changes.
134
Microsoft-Windows-Time-
Service
Warning
NtpClient was unable to set a manual peer to use as a time source
because of DNS resolution error on 'time.windows.com,0x1'.
NtpClient will try again in 15 minutes and double the reattempt
interval thereafter.
The error was: No such host is known. (0x80072AF9)
While the system is running
This event does not affect system operation if it is not recorded after
connecting to the internet.
157
Disk Warning Disk x is suddenly removed.
When creating a RAID
If you create new RAID on Windows, this event can be registered,
but this does not affect the system operation.
225
Kernel-PnP Warning
The application YYY with process id XXX stopped the removal or
ejection for the device ZZZ.
* ZZZ : Instance name of the device
YYY : Name of the process that was using the device
XXX : ID of the process that was using the device
When applying
Standard Program Package
This event does not affect system operation.
7023
Service Control Manager Error
"xxxxxxxx service terminated with the following error:
A device attached to the system is not functioning."
When running an OS for the first time
This event does not affect system operation if it is recorded only on
the first startup and not recorded repeatedly.
To Next Page
Loading...
