NEC ITK-8LCX User Manual

32
1.
Enabling/Disabling Animation
This procedure explains how to set whether to enable
animation when the screen changes.
(1) Display the Menu screen and select Settings.
(2) Select 1 (User Setting).
(3) Select 3 (Display).
(4) Select 7 (Portal Mode Setting).
(5) Select 3 (Animation).
(6) Select whether to enable animation.
Screen When the Phone Starts
The screen when the phone starts or home key is
pressed depends on settings. This section explains the
settings that affect the screen display.
Setting Home Screen
The following explains how to set a screen that will be
displayed when the phone has started up or the Home
key is pressed.
(1) Display the Menu screen, select Settings.
(2) Select User Settings.
(3) Select Display.
(4) Select Portal Mode Settings.
(5) Select Home Screen Setting.
(6) Select a desired screen.
Register a Home URL
The screen display is not only set by the Home screen
settings, but the phone can also be set to access the
XML application right after start up by registering the
address information of the application as a Home URL.
This section explains how to display the menu screen
and an example of the screen display when the phone
starts.
Animation is available for DT930 (Touch
panel model).
1
3
7
4
The default setting is Automatic.
Registering the home URL is performed during
the initial setting stage. For details, contact
your administrator.
Portal Screen
Portal screen is home (entrance) of the phone.
When multiple XML applications are used, the
XML application specified as the home URL
will be the portal screen, and be the entrance
to access different XML applications.
If there is not a registration of the home URL,
the Favorite screen is assigned as the portal
screen.

NEC ITK-8LCX Specifications

General

Brand	NEC
Model	ITK-8LCX
Category	Telephone
Language	English