EasyManuals Logo

NEC MC453X User Manual

NEC MC453X
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
14
2. Projecting an Image (Basic Operation)
2
1
3
Adjustable Tilt FootAdjustable Tilt
Foot Lever
Adjust the Tilt Foot
1. Lift the front edge of the projector.
CAUTION:
Do not try to touch the exhaust vent during Tilt Foot adjustment
as it can become heated while the projector is turned on and after
it is turned off.
2. Push up and hold the Adjustable Tilt Foot Lever on the front
of the projector to extend the adjustable tilt foot.
3. Lower the front of the projector to the desired height.
4. Release the Adjustable Tilt Foot Lever to lock the Adjustable
tilt foot.
The tilt foot can be extended up to 1.6 inch/40 mm.
There is approximately 10 degrees (up) of adjustment for the front
of the projector.
CAUTION:
Do not use the tilt-foot for purposes other than originally intended.
Misuses such as using the tilt foot to carry or hang (from the wall
or ceiling) the projector can cause damage to the projector.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC MC453X and is the answer not in the manual?

NEC MC453X Specifications

General IconGeneral
Native aspect ratio4:3
Projection distance0.9 - 10.9 m
Vertical scan range50 - 120 Hz
Horizontal scan range15 - 100 kHz
Projection technologyLCD
Contrast ratio (typical)16000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, horizontal-30 - 30 °
RMS rated power16 W
Number of built-in speakers1
PlacementCeiling, Floor
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Lamp power240 W
Lamps quantity1 lamp(s)
Light source typeLamp
Lamp power (economic mode)150 W
Service life of light source10000 h
Service life of light source (economic mode)20000 h
Built-in display-
FocusManual
Throw ratio1.5 - 1.8:1
Focal length range19.158 - 23.018 mm
Aperture range (F-F)1.6 - 1.76
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)320 W
Power consumption (standby)0.5 W
Power consumption (typical)305 W
Power consumption (economy mode)215 W
Power consumption (network standby)2 W
Noise level37 dB
CertificationUL, FCC Part15 Class B, CAN/CSA, ICES-003 Issue 6
Noise level (economic mode)29 dB
Full HDNo
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Analog signal format systemNot supported
Supported graphics resolutions640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA)
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100 Mbit/s
Storage temperature (T-T)-10 - 50 °C
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Remote control typeIR
Weight and Dimensions IconWeight and Dimensions
Depth261 mm
Width345 mm
Height108.4 mm
Weight3300 g
Package depth390 mm
Package width450 mm
Package height200 mm
Package weight4700 g

Related product manuals