NEC MC453X - [Iris]; [Baud Rate]

40
5. Using On-Screen Menu
[Iris]
Adjust the light output to the image signal and perform projection with emphasis on contrast.
1) Press ▲ ▼ button to select [Iris] menu.
2) Press <ENTER> button.
3) Press ▲ ▼ button to adjust levels.
Off......No correction.
On......Correct iris.
On start
HDMI setup
Setting
Standby mode
High altitude
ECO mode
Cooling fast
Closed caption
Key lock
lris
Baud rate
Sound
Off
Normal
Normal
Off
Normal
Off
Off
Off
19200
[Baud rate]
Select this function to adjust the projector transmission rate.
1) Press ▲ ▼ button to select [Baud rate] menu.
2) Press <ENTER> button.
3) Press ▲ ▼ button to select rate: 19200/4800/38400/9600.
On start
HDMI setup
Setting
Standby mode
High altitude
ECO mode
Cooling fast
Closed caption
Key lock
lris
Baud rate
Sound
Off
Normal
Normal
Off
Normal
Off
Off
Off
19200