NEC ML440 - Putting a Call on Hold; Changing the Volume; Earpiece and Speaker Volume; Ring Volume

3-2 Using Common Features
ML440 End User Guide - Revision 1
Putting a Call on Hold
Press . If the call remains on hold for longer than the hold time, it
rings again.
To return to a call on hold:
• For an internal call, press the Intercom Feature Key.
• For an external call, press the line key.
Feature Keys are programmed in the DSX. See your system administrator for more
details.
Changing the Volume
Earpiece and Speaker Volume
Each handset has individual volume settings for the earpiece, the
speakerphone, and the headset jack: press
Plus to increase the volume
of the item you are currently listening to and
Minus to decrease it. The
handset saves the volume setting.
Ring Volume
You can also set the ring volume for each handset. When the handset is
in standby, press
Menu, select Audio Settings then Ring Volume.
Use the
Left and Right cursor key to increase or decrease the ring
volume. If you turn the ring volume all the way down, the ringer turns
off.
Start a conference call
• During a call, press .
• Enter the extension with which you want to conference.
• Wait until the other extension answers, then press
to start the
conference.
Switch between the speakerphone
and earpiece
Press
Speaker.
To..... From the earpiece From the speakerphone
NOTE