Using Common Features 3-5
ML440 End User Guide - Revision 1
Editing a Contact’s Phone Number Before Dialing
Follow the steps below to edit a contact’s phone number before dialing.
Step 1 Open the main menu screen and select the Contacts icon.
Step 2 Highlight the contact you want to erase and press .
Step 3 Select Edit before dial, then edit the phone number.
Step 4 When you're finished editing the number, press or Talk.
This will not change the phone number stored in the contact list.
Assigning Contacts to a Speed Dial Number
You can assign one of eight number keys on the twelve key dial pad (2
through
9) to a contact and use it as a speed dial. Follow the steps
below to perform this procedure.
Step 1 Open the main menu screen and select the Contacts icon.
Step 2 Highlight the contact you want to assign, and press .
Step 3 Select Speed dial. The handset shows the list of speed dial numbers and
what contacts are assigned.
Step 4 Select the speed dial number you want to assign this contact to and
press
. If the number you select is already assigned, press
to erase the existing assignment or press
to overwrite the
assignment with the new contact.
Making a Call From a Speed Dial Number
Press and hold the number key that you assigned the contact to. The
handset automatically dials the first phone number on that contact
record.
Voice Mail Waiting Indicator
When you have new messages, the STATUS LED turns green or yellow,
according to the settings you selected in the LED signal menu (see
“Configuring the STATUS LED on the Handset” on page 2-9). After you
listen to all new messages, the ST
A
TUS LED turns off.
To Next Page
Loading...
