Using Common Features 3-7
ML440 End User Guide - Revision 1
Changing the PIN
Changing the PIN will prevent the handset from deregistering correctly (not
registering correctly).
Follow the steps below to change the PIN. You will have to enter the PIN
to reset the handset back to factory default settings.
Step 1 From the main menu screen, select the Settings icon.
Step 2 On the Settings screen, select Security.
Step 3 Select Change PIN. The handset prompts you to enter the current PIN
(Default 0000).
Step 4 Enter the four digits of the current PIN and press Select. The handset
prompts you to enter the new PIN.
Step 5 Enter the four digits you want to use as the new PIN and press Select.
Using Alarms
You can set two alarms on your handset: a one-time alarm and a
recurring alarm.
Setting the Alarm
Follow the steps below to set the alarm.
Step 1 From the main menu screen, select the Alarms icon.
Step 2 For a one-time alarm, select Alarm; for a repeating alarm, select
Recurrent alarm.
Step 3 Set the time you want the alarm to sound.
—Enter the time using the twelve-key dial pad, or use
Up and Down to
select the time.
—Select AM or PM.
—
Press
when you're finished.
Step 4 For a recurrent alarm, the handset prompts you to select the days of the
week you want the alarm to sound.
—To select a day, highlight the day and press
; selected days
show a check mark beside the name.
—To clear a day, highlight the day and press
.
—When you're finished, press
.
To Next Page
Loading...
