NEC MultiSync FP1350 - Page 67

5-26
6) For the signals below, picture size and position are calculated from above adjustment data and data are written
into EEPROM.
Preset Signal: No. 1 (VGA350) No.10 (XGA)
No. 2 (VGA400) No.11 (VESA800*600@75Hz)
No. 4 (640*400@70Hz) No.15 (1024*768@70Hz)
No. 5 (800*600@60Hz) No.16 (1280*1024@60Hz)
No. 7 (VESA350@85Hz) No.18 (Mac1152*870)
No. 8 (VESA400@85Hz) No.19 (1024*768@85Hz)
No. 9 (VESA640*480@75Hz) No. 20 (1280*1024@70Hz)
USER Signal: USER1 (PC98 1120*750(I)) USER13 (VESA 1600*1200@60Hz)
USER2 (VESA 800*600@56Hz) USER14 (1024*768@100Hz)
USER3 (VESA 1024*768@60Hz) USER15 (800*600@120Hz)
USER4 (VESA 800*60072Hz) USER16 (640*480@160Hz)
USER5 (1120*750@60Hz) USER17 (VESA 1920*1440@60Hz)
USER6 (640*480@100Hz) USER18 (1600*1200@70Hz)
USER7 (XGA-2 1024*768@72Hz) USER19 (1280*1024@85Hz)
USER8 (1024*768@80Hz) USER20 (800*600@140Hz)
USER9 (800*600@100Hz) USER21 (VESA 1792*1344@75Hz)
USER10 (640*480@120Hz) USER22 (VESA 1600*1200@80Hz)
USER11 (640*480@140Hz) USER23 (1024*768@120Hz)
USER12 (VESA 1600*1200@60Hz) USER24 (800*600@160Hz)
USER26 (VESA 1920*1440@75Hz)