NEC NP-PH1400U - To Remove the Wireless LAN Unit

180
6. Installation and Connections
To remove the wireless LAN unit
1. Press the button to set the projector to the standby mode, then
turnoffthemainpowerswitch.
2. Removetheanti-theftcap.
 Loosenthescrewandremovetheanti-theftcapfortheWirelessLAN
Unit.
3. PullouttheWirelessLANUnitfromtheUSB(LAN)port.
NOTE:
IfthewirelessLANunitisnottobeusedforanextendedperiodoftime,putthe
plate back and secure it with the two screws.