NEC NP-PH1400U - ⓫ Displaying a Picture Using [EDGE BLENDING]; Before Explaining Use of the Edge Blending Function

53
3. Convenient Features
⓫ Displaying a Picture Using [EDGE BLENDING]
TheEDGEBLENDINGfunctionallowsamulti-screenimagewithhighresolutiontobedisplayedonalargescreen.
Thisfunctionadjustsoverlappingedgesofimagesprojectedfromeachprojectortouniformmulti-screenimages.
NOTE:
• Forprojectorthrowdistances,referto“Throwdistanceandscreensize”onpage219, 220, 221.
• BeforeperformingtheEdgeBlendingfunction,placetheprojectorinthecorrectpositionsothattheimagebecomessquarein
the appropriate size, and then make optical adjustments (lens shift, focus, and zoom).
Before explaining use of the Edge Blending function
Thissectionexplainsthecasefor“Example:Placingtwoprojectorssidebyside”.Asshown,theprojectedimageon
theleftisreferredtoas“ProjectorA”andtheprojectedimageontherightisreferredto“ProjectorB”.Unlessotherwise
speciedhereinafter,the“projector”isusedtomeanbothAandB.
Example:Placingtwoprojectorssidebyside
EdgeBlendingarea
Projected area
Projected area
ProjectorA ProjectorB
Preparation:
• Turnontheprojectoranddisplayasignal.
• Tousetwoormoreprojectors,youhavetoturnon[CONTROLID]fromthemenu.Formoreinformation,referto
“SettingIDtotheProjector[CONTROLID]”onpage131.
① Enable [EDGE BLENDING].
1 Select[SETUP]→[EDGEBLENDING]andpresstheENTERbutton.