NEC NP-PH1400U - ❸ Turning on the Projector

18
2. Projecting an Image (Basic Operation)
❸ Turning on the Projector
NOTE:
• Theprojectorhastwopowerswitches:AmainpowerswitchandaPOWERbutton(POWERONandOFFontheremotecontrol)
•Turningontheprojector:
1. PressthemainpowerswitchtotheONposition(I).
 Theprojectorwillgointostandbymode.
2. PressthePOWERbutton.
 Theprojectorwillbecomereadytouse.
•Turningofftheprojector:
1. PressthePOWERbutton.
 Theconrmationmessagewillbedisplayed.
2. PressthePOWERbuttonagain.
 Theprojectorwillgointostandbymode.
3. PressthemainpowerswitchtotheOFFposition(O).
 Theprojectorwillbeturnedoff.
Remove the lens cap.
1. PressthemainpowerswitchtotheONposition(I).
 Theprojectorwillgointostandbymode.Wheninstandby
mode,thePOWERindicatorwilllightorangeandtheSTA-
TUSindicatorwilllightgreenwhen[NORMAL]isselected
for[STANDBYMODE].SeethePowerIndicatorsection.
(→ page 232)
 Whenyouareworkinginadarkroom,itisconvenientto
use the LED lights on the projector.
 PresstheLIGHTbuttontoturnontheLEDlightstoillu-
minate the control panel and the terminal panel; press it
again to turn off the LED light.