210
8. User Supportware
TIP:
ViewingtheHelpofPCControlUtilityPro4
• DisplayingtheHelpleofPCControlUtilityPro4whileitisrunning.
Click“Help(H)”→“Help(H)…”ofwindowofPCControlUtilityPro4inthisorder.
Thepop-upmenuwillbedisplayed.
• DisplayingthehelpleusingtheStartMenu.
Click“Start”→“Allprograms”or“Programs”→“NECProjectorUserSupportware”→“PCControlUtilityPro4”→
“PCControlUtilityPro4Help”.
TheHelpscreenwillbedisplayed.
Using on Mac OS
Step 1: Install PC Control Utility Pro 5 on the computer
1. Connect your computer to the Internet and visit our website (http://www.nec-display.com/dl/en/index.
html).
2. DownloadtheupdatedPCControlUtilityPro5fromourwebsite.
3. InFinder,control-click(“control”+click)orrightclickthePCControlUtilityPro5.mpkg.
4. Select“Open”fromthetopofcontextualmenuthatappears.
5. Click“Open”inthedialogbox.Ifprompted,enteranadministratornameandpassword.
6. Click“Next”.
“ENDUSERLICENSEAGREEMENT”screenwillbedisplayed.
7. Read“ENDUSERLICENSEAGREEMENT”andclick“Next”.
Theconrmationwindowwillbedisplayed
8. Click“Iacceptthetermsinthelicenseagreement”.
Follow the instructions on the installer screens to complete the installation.
Step 2: Connect the projector to a LAN
ConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page177),“Connect-
ingtoaWirelessLAN(Optional:NP02LMseries)”(→page178)and“❾ApplicationMenu-NETWORKSETTINGS”
(→page146)
Step 3: Start PC Control Utility Pro 5
1. OpenyourApplicationsfolderinMacOS.
2. Clickthe“PCControlUtilityPro5”folder.
3. Clickthe“PCControlUtilityPro5”icon.
PC Control Utility Pro 5 will start.
NOTE:
• FortheSchedulefunctionofthePCControlutilityPro5towork,youmusthaveyourcomputerrunningandnotinsleepmode.
Select“EnergySaver”fromthe“SystemPreferences”inMacanddisableitssleepmodebeforerunningthescheduler.
• When[POWER-SAVING]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonviathenetwork
(wiredLAN/wirelessLAN)connection.
• When[NETWORKSTANDBY]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonviawireless
LANconnection.