235
9. Appendix
Image is scrolling
vertically, horizontally
or both
• Checkthecomputer’sresolutionandfrequency.Makesurethattheresolutionyouaretryingtodisplayissupported
by the projector� (→ page 225)
• AdjustthecomputerimagemanuallywiththeHorizontal/Verticalinthe[IMAGEOPTIONS].(→ page 117)
Remote control does
not work
• Installnewbatteries.(→ page 10)
• Makesuretherearenoobstaclesbetweenyouandtheprojector.
• Standwithin22feet(7m)oftheprojector.(→ page 10)
• IftheremotecontrolcableplugisinsertedintotheREMOTEjack,theremotecontroldoesnotfunctionwirelessly.
(→ page 11)
• Makesurethattheremotecontrol’sIDcorrespondswiththeprojector’sID.(→ page 131, 132)
Indicator is lit or
blinking
• SeethePOWER/STATUS/LAMPIndicator.(→ page 232)
Cross color in RGB
mode
• PresstheAUTOADJ.buttonontheprojectorcabinetortheremotecontrol.(→ page 33)
• Adjustthecomputerimagemanuallywith[CLOCK]/[PHASE]in[IMAGEOPTIONS]inthemenu.(→ page 116)
No on-screen display
• Checkiftheon-screenmuteisturnedon.Toturnofftheon-screenmute,presstheON-SCREENbuttononthe
remote control or hold down the MENU button on the projector cabinet for at least 10 seconds� (→ page 37)
Formoreinformationcontactyourdealer.