NEC NP-PH1400U - Page 42

28
2. Projecting an Image (Basic Operation)
Adjusting with the remote control
1. HoldtheCTLbuttonandpresstheECO/L-SHIFTbutton.
 TheLensShiftscreenwillbedisplayed.
2. Press the ▼▲◀ or ▶ button.
Use the ▼▲◀▶buttonstomovetheprojectedimage.
TIP:
• Thediagrambelowshowsthelensshiftadjustmentrangeforthedesktopfront.Toraisetheprojectionpositionhigherthanthis,
use the tilt feet. (→ page 25)
1V
1H
0.2H 0.2H
0.55V*
0.4V
Height of projected image
Widthofprojectedimage
* Themaximumadjustablerangeforlensshift(V)is0.5VwhentheNP32ZLlensisused.