NEC P547UL - Connecting to Multipresenter

7. Connecting to a Network
109
7-2. Connecting to MultiPresenter
Preparations:
• When connecting the projector to a wired LAN, connect a LANcable to the unit. (→ page 88)
• When connecting the projector to a wireless LAN, install a separately-sold LAN unit in the unit.
(→ page 90)
• Congure the [NETWORK SETTINGS] of the projector. (→ page 111)
• Install the MultiPresenter app in the computer or tablet terminal.
https://www.sharp-nec-displays.com/dl/en/soft/multipresenter/index.html
The procedure is described here for each wireless LAN prole [INTELLIGENT CONNECTION], [INFRA-
STRUCTURE], and [SIMPLE ACCESS POINT].
① When connecting with an [INTELLIGENT CONNECTION]
1. Turn on the power of the projector and press the APPS button on the remote controller.
The start-up screen of MultiPresenter is displayed.
2. Start MultiPresenter.
The target device screen is displayed.
3. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal
is projected on the screen.