7. Connecting to a Network
118
Item name Description
CRESTRON Set the CRESTRON function.
Crestron Room View
Crestron Room View Select whether to use Crestron Room View or not.
• Initial value: OFF (do not use)
Crestron Control
Crestron Control Select whether to use Crestron Control or not.
• Initial value: OFF (do not use)
IP ADDRESS Set the Crestron Control’s IP address.
• Initial value: 192.168.0.100
• Allowable characters: Alphanumeric, period
• Number of characters: 7–15 characters
IP ID Set the Crestron Control’s IP ID.
• Initial value: 5
• Allowable characters: Alphanumeric
• Input character range: 3–65535
• Number of characters: 1–5 characters
NOTE:
• Upon shipment, the PJLink version is set to Class 1. If you wish to change it to Class 2, please contact your dealer.
To Next Page
Loading...
