Need help?Do you have a question about the NEC PASOLINK and is the answer not in the manual?
Details the performance characteristics of the IDU.
Details the performance characteristics of the ODU.
Details how alarms are indicated and reported by the system.
General overview of IDU types and ODU composition.
Details the composition of the 1+0 IDU equipment.
Covers code conversion, multiplexing, and serial conversion.
Covers multiplexing, scrambling, and parity check in digital transmission.
Explains differential encoding, 4-phase shift keying, and orderwire modulation.
Explains the 4-phase shift keying modulation process.
Describes amplitude modulation of EOW signal with a 450 kHz carrier.
Covers EOW, alarm, main signal demodulation, and differential decoding.
Explains coherent detection of 70 MHz IF signals for baseband recovery.
Describes the process of differential decoding, reverse of encoding.
Covers frame synchronization, descrambling, and demultiplexing.
Covers demultiplexing and unipolar-to-bipolar code conversion.
Details ASC transmission, including PCM codec and decode circuits.
Explains the transmission of 9.6 K digital service channel (DSC).
Provides two channels for cluster alarm transmission.
Details wayside (WS) signal transmission procedures.
Covers G.703 codirectional and V.11 transmission for 64K DSC.
Details LAN transmission for 10BASE-T or 100BASE-TX.
Describes alarm and control functions, including fault detection.
Details ODU interface terminals and jacks.
Describes ODU controls, indicators, and test jacks.
Covers packing list check, sorting, and delivery of equipment.
Lists necessary equipment, materials, and checklists for site preparation.
Provides an overview of installation procedures including mounting, grounding, and connections.
Lists necessary test equipment like a digital multimeter for start-up.
Step-by-step guide for powering up the IDU.
Procedure for safely shutting down the IDU equipment.
Covers setting and monitoring the IDU/ODU system via PC.
To Next Page
General
