NEC PASOLINK installation procedure
January 2002
Hack saw 20
Description
Quantity
Hammer (450 g) 1
Set file 5 EA/set(smooth) 1
Flat file 250 mm (second –cut) 1
Flat file 250 mm (smooth) 1
Crimping tool 1.25 – 8 sq. 5N18 1
Hydraulic crimping tool 14-150 sq. 1
Soldering iron 60 W 2
Holder for soldering iron 2
Tip for soldering iron 60 W 2
Hand tool kit 4
Step ladder 2
Power cable reel 1
Tool box 2
Box end wrench 2
Adjustable wrench 375 mm 2
Safety helmet 5
Safety belt 3
Oil can 1
2-The test equipment an tools include:
Description
Quantity
Digital multimeter 1
Lap top computer ( with the appropriate software) 1
RS232 Cable. 2
BER Test set (for 2M channels). 2
2M test chords. 4
2M insertion termination tool. 1
Jumpering cable(wires) for the 2M channels loopback. N/A
Hand tools kit. 1
Step ladder. 1
Two adjustable wrench (150 mm,250 mm) 2
Soldering iron 60 W. 1
Crimping tool 1.25 – 8 sq. 5N18 1
Hydraulic crimping tool. 1
Wrench set (6-24 mm). 1
Box end wrench. 1
Canvas bag. 1
Power outlets extension. 1
Power cable reel. 1
Two safety belt. 2
Black bag or equivalent for tools 1
To Next Page
Loading...
