NEC PE506UL - Connecting to Multipresenter

8. Connecting to a Network
84
2 Connecting to MultiPresenter
Preparations:
• When connecting the projector to a wired LAN, connect a LAN cable to the projector. (→ page 80)
• When connecting the projector to a wireless LAN, install a separately-sold LAN unit (NP05LM) in the projector.
(→ page 80)
• Configure the NETWORK SETTINGS of the projector. (→ page 55)
• Install the MultiPresenter app in the computer or tablet terminal.
https://www.sharp-nec-displays.com/dl/en/soft/multipresenter/index.html
① When connecting using a Wired LAN
1. Turn on the projector and press the APPS button on the remote control.
The start-up screen of MultiPresenter is displayed.
2. Start MultiPresenter.
The target device screen is displayed.
3. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal is projected on
the screen.
② When connecting using a Wireless LAN
1. Turn on the projector and press the APPS button on the remote control.
The start-up screen of MultiPresenter is displayed.
2. Connect your computer or tablet terminal to the access point matching the “SSID” displayed in the start-
up screen.
3. Start MultiPresenter.
The target device screen is displayed.
4. Enter the 4-digit PIN code displayed in the start-up screen in the target device screen.
When connection with the projector is completed, the screen of the computer or tablet terminal is projected on
the screen.