14
2. Projecting an Image (Basic Operation)
5 Selecting a Source
Selecting the computer source
NOTE: Turn on the computer source equipment connected to the projector.
Detecting the Signal Automatically
Press the INPUT button. The projector will search for the available input
source and display it. The input source will change as follows:
Computer →HDMI1 → HDMI2 → USB-A → LAN
• With the INPUT screen displayed, you can press the
▼
▼ button to
select the input source.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the Computer, HDMI1, HDMI2, USB-A, or APPS buttons.
Computer
HDMI 1
HDMI 2
USB-A
LAN
To Next Page
Loading...
