12
2. Projecting an Image (Basic Operation)
❸ Turning on the Projector
1. Remove the lens cap.
(For PE506UL only )
Press and hold both ends of the lens cap and pull it toward
you.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will blink and the projector will
become ready to use.
TIP:
• When the message “PIN code” is displayed, it means that the
[SECURITY] feature is turned on.
(→ page 52)
After you turn on your projector, ensure that the computer
or video source is turned on.
Power On
or
Steady blue light
Steady blue light
Steady green light
Blanking green light
Blanking orange light
Standby
(→ page 91)
To Next Page
Loading...
