NEC Univerge SV 9500 - TO ORIGINATE A CALL USING SELECTIVE DIALING

122
5. FEATURE OPERATION
TO ORIGINATE A CALL USING
SELECTIVE DIALING
(DYNAMIC DIAL PAD, PRESET
DIAL)
Dynamic Dial Pad
STEP 1: Enter desired telephone number (Digit keys
0-9, *, and #).
STEP 2: LED on key lights. Here the key touch
tone.
STEP 3: The dialed number appears on the top of
LCD.
Preset Dial
STEP 1: Enter desired telephone number (Digit keys
0-9, *, and #).
STEP 2: The dialed number appears on the top of
LCD.
STEP 3: Lift handset or press key.
- OR -
STEP 3: Press the originating Line key and lift the
handset.
Note:
Pressing the Speaker key or going off-hook is not
necessary.
DT830
DT430/410
Speaker
2000
Mic >>>
1:25 PM MON 11 MAY 2015
Note:
DTZ-2E-3 is not supported.
Note:
Originating call operation is cancelled by the fol-
lowing soft key operation;
- Press the Exit key or the Cnl key.
- Press the Clr key, and cancel by one digit.
DT830
DT430/410
2000
Clr Cnl
Input Dial Number
Speaker