NEC Univerge SV 9500 - Setup with Menu Key for Dt830 Series

38
SETUP WITH MENU KEY FOR
DT830 SERIES
• TO ENABLE/DISABLE OFF-HOOK
RINGING
The procedure below shows how to enable/disable Off-
hook ringing
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 3: Select Incoming Call.
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key.
STEP 4: Select Offhook Ring
Select an item by either of the following operations.
• Highlight an item by using or the UP/DOWN soft
key, and then press , or the OK soft key.
• Press key
1
1
1
2
Data Backup/Restore
[Setting]
3
Download
OKMenu

User Setting
1
1
1
2
Display
[User Setting]
3
4
5
6
7
Change Password
Peripherals
Talk
OKBack

Security
Incoming Call
Usability
2
2
1
2
Headset Ring
[Incoming Call]
3
4
5
6
Ring Tone
Headset Ring Volume
OKBack

Illumination
Ring Volume
Offhook Ring