NEC Univerge SV 9500 - Connecting Line Cord

27
STEP 4: When an AC adapter is used to supply power
to the telephone, connect the AC/DC adapter
to the telephone as shown below.
CONNECTING LINE CORD
STEP 1: Insert a Line cord plug into the Line connector
on the back of the telephone set until you
hear it click.
STEP 2: Thread the line cord through the groove on
the back of the telephone.
Telephone
Groove
To LAN
To PC
LAN Cable
DT430/410
Line Cord
Line Cord Plug
Line Connecto
r
Telephone
Line Cord
Groove
Telephone