NEC Univerge SV 9500 - To Change Group Name

186
TO CHANGE GROUP NAME
STEP 1: Open the Directory screen (see TO ADD
NEW DATA).
STEP 2: On the Directory screen, select Group
Setting.
Select an item by either of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and then press , or OK soft key.
• Press key.
STEP 3: Select a group name to be changed.
In this example, Default is selected.
Select an item by either of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and then press or OK soft key.
• Press key, and then press or OK soft key.
STEP 4: Select Name.
Select an item by either of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and then press , or OK soft key.
• Press key.
DT830
3
3
Search
1
2
[Directory]
3
4
0
Own Number
Delete All
Edit
OKMenu


Group Setting
1
1
1
2
[Group]
3
4
5
6
20
Default
OK
Back
Group 6
Family
Friends
Colleagues
VIPs
:
Group 20

1
1
1
2
[Group Setting]
3
Ring Tone
OKBack

Illumination
Name