142
CALL PICK-UP (DIRECT)
To Program Pick- up Direct Key (One-
Touch Speed Calling Key)
STEP 1: Press key.
STEP 2: Press the One-Touch Speed Calling key.
STEP 3: Dial the “Direct Call Pick-up” access code.
STEP 4: Press key again.
When A Station Within System Rings
STEP 1: Lift the handset, receive a dial tone.
STEP 2: Press the PICK-DIRECT key and dial the sta-
tion number to be picked up.
– OR –
STEP 2: Dial the “Direct Call Pick-up” access code and
the station number to be picked up.
STEP 3: Connection to calling party is established.
STEP 4: If busy, the original call must be placed on
hold before new call can be picked up.
OUTGOING TRUNK QUEUING
If Trunk Is Busy
STEP 1: Receive Trunk Busy indication. Press the
CALL BACK key, Call is placed in queue for
next available trunk.
STEP 2: When trunk is available, the setting station is
alerted by ringing and flashing red LED.
STEP 3: Press key or lift the handset. A dial
tone is heard or number is automatically di-
aled if Least Cost Routing is provided.
OFF-HOOK TRUNK QUEUING
STEP 1: Press key, receive a dial tone.
STEP 2: Dial desired telephone number. Encounter a
trunk busy condition.
STEP 3: A station user receives a service set tone and
leaves speaker on.
STEP 4: The desired number is automatically dialed
when a trunk becomes available.
station
Calling
party
Called
PICK UP 32000 DDD
1:25 PM MON 11 MAY 2015
OG-Q SET
1:25 PM MON 11 MAY 2015
To Next Page
Loading...
