NEC Univerge SV 9500 - Boss;Secretary Transfer

157
If Station A hung up
STEP 1: Station B dials “Paging” answer code. Station
A rings.
STEP 2: Station A picks up and announces call.
STEP 3: Station A hangs up. Station B and the calling
party are connected.
– OR –
(Dependent on System Programming)
STEP 3: Station B dials “Paging” answer code, and is
immediately connected to the calling party.
BOSS/SECRETARY TRANSFER
Secretary
STEP 1: Lift the handset, press the boss’s ringing line.
Ask the calling party to hold.
STEP 2: Press the boss’s line again. “Voice Call” is au-
tomatically established.
STEP 3: Announce the call to the boss.
If Boss Accepts Call
STEP 1: Secretary replaces the handset.
STEP 2: Secretary presses the boss’s line to return to
the calling party.
If Boss Refuses Call
STEP 1: Secretary presses the boss’s line to return to
the calling party.
Stations A and B each display
the other’s number, flashing
TRANSFER DDD 3
1:25 PM MON 11 MAY 2015
Calling trunk number
DDD 3
1:25 PM MON 11 MAY 2015
PAGING DDD 3
1:25 PM MON 11 MAY 2015
DT830
DT430/410
Calling party
DDD 3
1:25 PM MON 11 MAY 2015
Boss and secretary station each
display the other’s number
ICM XXXX
1:25 PM MON 11 MAY 2015