NEC Univerge SV 9500 - 6 Directory Operation; To Add New Data

178
6. DIRECTORY OPERATION
This chapter explains about Personal Directory function
of DT830 Series. By using Personal Directory function,
you can make a call with simple operation.
Personal Directory function can register up to 500
entries (4 telephone numbers per entry). You can add/
view/edit/delete these entries. If the directory contains
500 entries (maximum), entries can be removed using
• TO ADD NEW DATA
• TO CHANGE GROUP NAME
• TO FIND REGISTERED DATA
• TO MAKE A CALL FROM DIRECTORY
• TO ADD PREFIX TO NUMBER
• TO EDIT DIRECTORY DATA
• TO DELETE ALL DATA
• TO DELETE SPECIFIC DATA
TO ADD NEW DATA
STEP 1: While indicating the current time on LCD,
press key to open the Menu screen.
-OR-
Press
(Directory) key. The Directory screen
shown at STEP 3 can be directly displayed.
STEP 2: Select Personal.
Select an item by either of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and then press , or OK soft key.
• Press key.
Note:
A maximum of 500 entries can be registered in
Directory.
DT830
Menu
Note:
Directory feature is available for DT830 Series
only. DT430/DT410 Series does not support the
directory feature.
Note:
When using Phonebook feature is disabled, this
screen will not be displayed. In that case, skip
this step.
1
1
1
2
[Directory]
3
Corporate
System
OKMenu

Personal