130
To Enter Pause
STEP 1: Press the Pause soft key (this soft key is dis-
played pressing >>> soft key twice).
STEP 2: Pause is indicated as “-” on the LCD.
To Enter Voice Call
STEP 1: Press the Voice soft key (this soft key is dis-
played pressing >>> soft key twice).
STEP 2: Pause is indicated as “V” on the LCD.
To Delete the Entered Character
STEP 1: Place the cursor (underscore) in front of the
desired character (in this example, “2” is de-
leted) with LEFT/RIGHT soft key (these soft
keys are displayed pressing >>> soft key), or
pressing
/ .
STEP 2: Press the Clr soft key.
To Delete the Phone Number Data
STEP 1: Press the Delete soft key (this soft key is dis-
played pressing >>> soft key twice).
STEP 2: Press the OK soft key.
STEP 3: The following message appears for 3 sec-
onds.
Note:
Up to three consecutive entries of the “Pause”
sign (-) are allowed.
1234567890_
Pause Voice Delete >>>
1234567890-_
Pause Voice Delete >>>
1234567890_
Pause Voice Delete >>>
1234567890V_
Pause Voice Delete >>>
Note:
When this process ends in failure, “Delete
Failed!” is displayed for 3 seconds on the LCD.
1234567890_
Pause Voice Delete >>>
Entry is deleted
SPD Set Mic NoDist
1:25 PM MON 11 MAY 2015
To Next Page
Loading...
