148
Using Soft Key
STEP 1: Press the CF-Busy soft key. Receive a spe-
cial dial tone.
STEP 2: Dial the destination; wait for a service set
tone.
STEP 3: “FORWARD SET” is displayed; Call Forward-
ing – Busy Line is set.
To Verify (Only For Terminal With LCD)
STEP 1: Press the FWD-BY key.
STEP 2: The display indicates the station number calls
are forwarded to.
To Cancel
STEP 1: Press key. Receive a dial tone. If can-
celing for another station, press MULTILINE
APPEARANCE feature key.
STEP 2: Press the FWD-BY key or dial “Call Forward-
ing – Busy Line” cancel code. Receive ser-
vice set tone. LED goes out at your station (or
the terminal of the multiline station).
STEP 3: Press key. Call Forwarding – Busy
Line is cancelled.
Using Soft Key
STEP 1: Press the CF-Busy soft key.
STEP 2: Receive a service set tone and “FORWARD
CANCEL” is displayed.
Note:
With soft key operation, the CF-Busy flashes on
the display.
FORWARD SET
Mic >>>
1:25 PM MON 11 MAY 2015
FORWARD 2000
1:25 PM MON 11 MAY 2015
FORWARD CANCEL
1:25 PM MON 11 MAY 2015
FORWARD CANCEL
Mic >>>
1:25 PM MON 11 MAY 2015
To Next Page
Loading...
